·       Cheerleading Company’s CUSTOM uniforms (Bow To Toe Packages, Value Pax, Fast Pax and Energyze)  are manufactured to standard sizing charts. Measurements are taken to determine which standard size will be the best possible fit. Garments are not manufactured to fit an individual's exact measurements, however we are able to customize the top length and skirt length on most garments.  

·        If you are interested in ordering our IN STOCK/QuickPAX uniforms, please click here:  http://www.cheerleading.com/sizing_instock.php .

·       Cheerleaders grow! Hold fittings as close to the time of ordering as possible, and take potential growth into account when determining the size to order.  

·       As with any standard-size garment, some alterations may be necessary for the best fit. We offer a generous seam allowance on most garments to allow for easy alterations if needed. Alterations and alteration costs are the sole responsibility of the purchaser. Cheerleading Company does not provide alterations. Cheerleading Company allows small tolerances in the length and width of garments. Garments may measure up to +/- 1/2" of the specified length and +/- 1/2" of the specified bust/chest or waist size.

·       Looking for the best way to fit your team? Try one of our Cheer Fit Kits! For a small deposit, you will receive garments in a range of sizes which will allow you to inspect the actual fit and quality of our uniforms. With our Cheer Fit Kits, your team members are able to actually try on the uniforms to determine the best fit! Please click here for more information.

Please measure to the nearest inch with a full measuring tape. All decimal measurements will be rounded up to the nearest inch. We suggest wearing a bathing suit when measuring completely around the body, and we recommend the same person measure all team members.

Bust/Chest: Measure completely around the body at the fullest point of the bust/chest under the arms with tape straight across the back and arms by side of body.

Waist: Measure completely around the narrowest portion of the waist.

Hips: Measure completely around the fullest part of the hips (approx. 8" below the natural waistline).

Back Waist Length "BWL": Measure from the tip of the most prominent bone at the base of the neck to the natural waistline. This helps determine top length.

Skirt Length: Our skirt length is measured from the bottom of the waistband to the edge of the skirt, and from the natural waistline to the edge of low-rise skirts. Measure in back from the natural waistline over the backside to the desired length on leg. Please give length in whole inch increments (ex: 12", not 11 ½"). You may also use our standard (STD) skirt length, if desired. The waistband is not included in skirt length. Measure all Low-Rise skirts from the natural waist. Because of the low-rise nature of these skirts, the body of all Low-Rise elastic waist skirts will measure 3" shorter than the provided measured skirt length (not including waistband), and the body of all Low-Rise zipper waist skirts will measure 2" shorter than the provided measured skirt length (not including waistband). FIT KITS RECOMMENDED FOR LOW-RISE SKIRTS.

Inseam: Measure from the inside of the leg beginning at the crotch seam and measure down the leg to the desired length. We recommend that uniform shoes be worn to determine the proper inseam.

Arm Length: Our arm length is measured from the end of the clavicle to the outer fold of the wrist with the arm slightly outstretched and elbow straight. To find the end of the clavicle, feel the bone at the top of the shoulder. Follow this toward the arm until you reach the indentation indicating where the arm and shoulder meet. Measure from this point, down the top of the extended arm with straight elbow, to the outer fold of the wrist, which can the found by bending hand upward, palm down, so that the finders are trying to point upward toward the ceiling. All Sleeve Lengths come in standard lengths. Sleeve Lengths on long sleeve Flexstretch™ and SpiritFlex tops may be ordered as standard or long (STD + 2").